Ways to Choose a Pedestal and Paver Components Supplier

Appian Way Pedestal System (AWS) - Mutual Materials

The term ‘pedestal paver system’ generally refers to structural strength pavers laid over pedestal support (fixed or adjustable height) that raises the tiles or pavers off the existing surface to create an elevated deck. When choosing a pedestal and paver components supplier, there are several factors to consider. For example, you should look for a company with a good reputation. You should also check whether the pedestals are clean and always compare prices to find the best value for money.


When choosing a pedestal and paver components supplier, there are a few factors to consider:

  1. You should find out if the company offers quality materials.
  2. It would help if you got a few samples of the products. You should be able to see the color and texture.
  3. It is essential to know if the company has experience installing such products.

You should also know if the company can follow the installation procedures required by the paver manufacturer.

Pedestals and paver components can be found at a range of prices. They can be bought in different sizes, including smaller, portable ones. For larger orders, choose paver components that are available in pre-cut sizes. For example, if you install pavers in a garden, you can choose ones 4-5/32 inches tall. You can also choose paver components that have a diameter of 24″ and a length of 24″. Make sure to select a supplier who can offer a complete range of products.


When choosing a pedestal and paver components supplier, check that the products are clean and free from contaminants. The surface of the pedestal system must be free from rough foreign matter and be broom clean. In addition, the substrate must slope and provide positive drainage. If the substrate is composed of polystyrene insulation, it should be a minimum of 60 psi and clean. Low-density polystyrene is not recommended for pedestal installation.

Paving pedestals have many advantages, but they are only suitable for some kinds of projects. They can’t support a high point load, so choosing the right one is essential. For example, a pedestal made of porcelain or wood will not be suitable for use with stone pavers. Moreover, a pedestal made of porcelain will absorb water. Another disadvantage of pedestals is that they are not durable enough to support point loads of more than 30 to 40 lbs.

Nevertheless, they are becoming increasingly popular, and they have several advantages. For example, they can be easier to clean and lower maintenance costs. Furthermore, they won’t produce efflorescence, a common problem associated with other materials.

Choosing a pedestal and paver components supplier should be based on shop drawings showing all the components required for a specific project. These drawings should show the layout of the various areas and how the various components fit together. Moreover, the supplier should provide detailed installation instructions and recommendations. Moreover, the pedestals should be able to withstand lateral forces and provide proper insulation. The supplier should provide samples of these products.

Leave a Reply